FX Garage 30 Edge

The item "FX Garage 30 Edge" most likely refers to an interlocking edge piece for modular garage floor tiles that is part of a system like the CarTrax FX Garage Flooring line. The "30" might refer to a specific tile thickness, though the common FX tile edges appear to be for a 1-inch or 20mm/30mm-thick tile system.

Here is a general description and key features based on product information for these types of flooring edges:

 FX Garage Edge Description

The FX Garage 30 Edge is a modular trim piece designed to create a smooth, finished transition from the interlocking garage floor tiles down to the existing floor (like concrete).

Key Features and Specifications

• Type: Interlocking Edge Tile (also called ramp or trim).

• Function: Provides a beveled, gradual slope at the perimeter of an installed floor, making it easy to roll vehicles, creepers, and carts onto the tiled area. It also completes the aesthetic look of the floor installation.

• Compatibility: Designed to snap directly onto the main FX Garage Floor Tiles, which are often a ribbed or vented design for drainage.

• Material: Typically made from a durable, high-impact material like Polypropylene (PP) or 100% Recycled Rubber Tires (depending on the specific brand/product line).¹

• Durability: Industrial strength, resistant to common garage chemicals like oil, gas, acid, and solvents, and often features UV resistance.²

• Dimensions (Approximate):

  • Length: Often around 15.75 inches (40 cm).³

  • Width/Depth: Around 2.36 inches (6 cm).⁴

  • Height: Designed to match the height of the main tile, which may be close to $1''$ (about $25.4 \text{ mm}$) or specifically $30 \text{ mm}$ thick.

• Connection Type: These edges come in two connection types to fit the tile's perimeter:

  • Male (Pegged): Has the pegs that insert into the main tile's loops.

  • Female (Looped): Has the loops that receive the main tile's pegs.

• Installation: DIY-friendly snap-together installation. No special tools or adhesive are typically required.